Wind Solar Charge
Wind Solar Charge
 |
 1200W GRID TIE POWER INVERTER 14V 28VDC 110VAC 60HZ for SOLAR PANEL WIND TURBINE  US $228.17
|
 1200w grid tie power inverter dc 28 52v to ac 220v 240v US $270.00
|
 105 V 28 V DC GRID TIE INVERTER 8 5 v 120 v 190 v 240 v AC 50 60 Hz US $289.99
|
 New 1200w grid tie inverter DC 28 52v 110v AC for solar panel wind promotion US $198.29
|
 New 1200w grid tie inverter 14 28v dc 110v acsolar panel wind turbine free ship US $259.13
|
 60 AMP ANALOG AMPERE METER FOR WIND TURBINE GENERATOR SOLAR HIGH ACCURACY AC DC US $13.99
|
 1200 WATT GRID TIE INVERTER ACCEPT 28 52vdc FOR110V THATS HAS BEEN REFURBISH US $149.00
|
 60amp TriStar TS 60 SOLAR WIND Power PWM Charge CONTROLLER with DIGITAL METER US $329.45
|
 XANTREX C35 SOLAR Charge CONTROLLER 35 Amps for 12V or 24V BATTERY CHARGING US $149.95
|
 New 600w solar panel wind grid tie inverter DC 14 28v AC 110vfree shipping US US $149.39
|
 New design600w solarwind grid tie inverter DC 14 28v AC 110V free shipping US $149.16
|
 New 1200w grid tie power inverter DC 14 28v 110v AC for solar wind free shipping US $259.11
|
 1500 3000 Watts PURE SINE WAVE POWER INVERTER 12V115VAC US $279.99
|
 1200W grid tie inverter 14 28VDC 110VAC Charge for solar panel wind turbine CA US $239.07
|
 600W grid tie inverter 28 52VDC 110VAC Charge for solar panel or wind turbine CA US $129.07
|
 3000 6000 W Watts Pure Sine Wave Power Inverter 12V DC to 115V 60Hz AC RV Solar US $699.99
|
 105 V 28 V DC 400 WATTS MPPT GRID TIE INVERTER 110 V 120 V 190 V 240 V AC 60 HZ US $199.00
|
 650 Watt 12 V AC Wind Turbine System Charge Controller US $689.00
|
 600 WATTS 105 V 28 V DC MPPT GRID TIE INVERTER 110 V 120 V 190 V 240 V AC 60 HZ US $299.00
|
 1600 Watt Grid Tie Inverter 4 Solar Panel Wind Turbine US $565.00
|
 550 Watt 12 V AC Wind Turbine System Charge Controller US $559.00
|
 1000W Charge Controller for Wind Generator Air X Solar US $269.00
|
 1200 Watts 105 V 28 V DC MPPT Grid Tie Inverter 60HZ 110 V 120 V 190 V 240 V AC US $585.00
|
 400 Watt Grid Tie Inverter 12 V 440 W Mono Solar Panel 4x Above 100 W US $1,179.00
|
 Electric Stationary Trainer Bike bicycle generator US $549.00
|
 745mm 2 1 2 Pole Tower Mounting Base Foundation for Wind Turbine Generator US $465.00
|
 60 Amp XANTREX C60 SOLAR and WIND Power PWM CHARGE Controller with DIGITAL Meter US $325.00
|
 LED 1200W Grid Tie power inverter DC 28V 52V AC 110V US $269.99
|
 15 AMP ANALOG AMPERE METER FOR WIND TURBINE GENERATOR SOLAR HIGH ACCURACY AC DC US $9.99
|
 NEW 1200 WATT GRID TIE INVERTER ACCEPT 14 28VDC FOR110V US $239.00
|
 TRIPP LITE APS2012 INVERTER CHARGER 2000 WATT NEW US $579.00
|
 600W GRID TIE POWER INVERTER 28V 52VDC 110VAC 60HZ for SOLAR PANEL WIND TURBINE US $108.11
|
 1200w grid tie power inverter 28v 52v dc to 110v ac with CE and C tick US $34.00
|
 New 600w solar panel wind grid tie inverter DC 28 52v AC 110vfree shipping US US $149.09
|
 New design 600w grid tie inverter DC14 28v AC 110v for solar panel wind US US $99.69
|
 New600w grid tie inverter 28 52v DC 110v AC for solar panel wind promotion US $149.23
|
 New 1200w grid tie inverter 14 28v DC 110v AC for 24v battery12v solar panel CA US $259.56
|
 New1200w grid tie inverter 14 28v dc 110v ac for solar panel wind promotion US $199.67
|
 New 2500w grid tie inverter 14 28v DC 110v AC for solar panel wind turbine CA US $548.68
|
 1200w grid tie inverter 28 52v DC 110v AC for 36v 48v battery free shipping CA US $249.32
|
 New600W grid tie inverter 28 52V DC 110V AC FUSE for solar panel wind turbine US $149.45
|
 1200W GRID WIND SOLAR TIE INVERTER 14 28VDC 110VAC charge for solar panel wind US $279.49
|
 New 1200w Grid Tie Power Inverter 28 52 dc to 220v ac US $269.99
|
 Xantrex C40 Solar Wind Turbine Charge Load Controller Control US $141.98
|
 440 A 12 24 48 V Wind Solar Diversion Charge Control US $339.50
|
 1200 WATT GRID TIE INVERTER ACCEPT 14 28vdc FOR110V THATS HAS BEEN REFURBISH US $149.00
|
 Xantrex C60 Solar Wind Turbine Charge Controller US $239.98
|
 40amp XANTREX C40 PWM Charge CONTROLLER DIGITAL Meter WIND and SOLAR Control US $269.50
|
 Ramsond SunRay 3000 W Watts Pure Sine Wave Inverter 12V US $599.99
|
 NEW1200w grid tie power inverter DC 28 52v to AC 110v US $31.00
|
 SLR125 SOLAR WIND AGM BATTERY HI CAPACITY MAINT FREE US $249.99
|
 1500 3000 W Watt Pure Sine Wave Power Inverter Solar RV US $279.99
|
 Midnite Solar Classic 200 Charge Controller 200VDC Input MPPT US $799.00
|
 QTY 2 SLR125 SOLAR WIND AGM BATTERY HI CAPACITY MAINT FREE VMAX SOLAR BATTERY US $489.99
|
 1200w grid tie power inverter 14v 28v dc to 220v ac with CE and C tick US $135.99
|
 SWEA 500 Wind Generator 500 Watt Grid Tie Kit US $989.00
|
 Xantrex C60 Solar Wind Turbine Charge Controller 12 24V US $169.98
|
 2500W GRID TIE INVERTER14V or 28v or 50vDC 110VAC charge for solar panel wind C US $399.99
|
 440 Amp 12 24 48 V Wind Solar Battery Charge Controller US $339.50
|
 Morningstar Sunsaver MPPT Charge Controller SS MPPT 15L US $217.75
|
 60 AMP 12 24 VOLT SOLID STATE PWM CHARGE CONTROLLER SOLAR AND WIND GENERATOR US $162.50
|
 Xantrex C40 Solar Wind Turbine Charge Load Controller US $209.98
|
 MPPT Grid Tie Inverter for Wind Turbine Solar 600 Watt US $299.20
|
 1200W GRID TIE INVERTER dc 50 to 100v 110v or 220v ac US $299.99
|
 Xantrex CM Digital METER with LCD Display for C35 C40 C60 PWM Solar Controllers US $129.50
|
 NEW Kinesis K3 BLACK Wind Solar 3 in 1 Portable Cell Phone Battery Charger US $99.95
|
 NEW Parallel Power Inverter 2500W 12V DC to 110V AC 5000W WATT US $190.59
|
 NEW Parallel Power Inverter 2500W 24V DC to 110V AC 5000W WATT US $186.59
|
 Xantrex C35 Solar Wind Turbine Charge Controller UL Listed US $119.98
|
 1200w 4pcs x 300w grid tie power inverter 14 28v 230v US $339.99
|
 10pcs 8 AMP 45 VOLT Schottky BLOCKING DIODES Wind Solar US $14.75
|
 New 1200w Grid Tie Power Inverter 28 52 dc to 110v ac US $34.00
|
 Wind Turbine Charge Controller 3 Phase AC beawindhog US $120.00
|
 300w600w1200w2500w3500w5000w Grid Tie Inverter For Solar Panel Wind Turbine US $179.99
|
 Hybrid Solar Wind Charge Controller 500W100W wind charge controller regulator US $129.99
|
 Wind Solar Charge Controller with 40A dump relay included US $19.50
|
 300W GRID TIE INVERTER 14V 28VDC SOLAR PANEL POWER JACK US $79.99
|
 1200W GRID TIE INVERTER28 52v dc110v or 220v240vac US $309.99
|
 30A LCD Solar Charge Controller 12V Digital Screen PWM Off Grid Home Gate Steca US $75.00
|
 Hybrid Wind Solar Charge Controller 400W Regulator 12V wind charge controller US $164.99
|
Applied Magnets Introduces the Windmax Line of Hybrid Small Wind Generators
Applied Magnets is pleased to announce it's low cost lineup of WindMax Hybrid Small Wind & Solar Power Generators.
The new line consists of the WINDMAX-HY06 600W Hybrid Solar-Wind System (generator, hub, 3 blades, tail , controller and one BP Solar 115W solar module) and the WINDMAX-HY11 1115W Hybrid Solar-Wind System (generator, hub, 3 blades, tail, controller and two BP 170w solar modules).
Both Hybrid wind/solar systems are compact & light weight with low start-up & cut-in speeds which begin producing power at 5.2 mph. These new systems are highly efficient, highly reliabile and encorporate state-of-the-art Electromagnetic Speed-Control.
The new WindMax Hybrid Wind & Solar Power Generators are also available as stand alone wind turbines in the WINDMAX-H05 500W Max Power Wind Generators w/controller and Electromagnetic Speed Control, Blade Over-speed Braking with Hybrid Wind/Solar Output Capability, the WINDMAX-H08 775W Wind Generators w/controller, with Electromagnetic Speed Control, Blade Over-speed Braking with Hybrid Wind/Solar Output Capability, and the WINDMAX-H20 2kW Wind Generators with Electromagnetic Speed Control, Blade Over-speed Braking with Hybrid Wind/Solar Output Capability.
The Windmax H series Wind turbine system is the perfect choice in a smart investment for a renewable energy solution built on advanced technologies. The Windmax H series defines a new level of superior performance and reliability by using:
1. Strong Neodymium magnet PMA, the unique winding and multi pole design reduces the start-up torque of the alternator that assures the WINDMAX-H series can generate electricity at low wind speed.
2. Advanced aerodynamic braking by patent-pending low noise, nylon/reinforced fiber glass blades.
3. Electromagnetic over-speed control, no more problematic mechanical furling.
4. Integrated solar-wind hybrid power generation.
5. Innovative low maintenance two-moving-part system design.
6. Easy to Install, Light Weight and highly reliable.
7. Generator: The generator is built using high-performance rare earth neodymium permanent magnets, so the alternator is compact and light weight with a high power generating efficiency. Generator housing is made using precision cast technology from high strength aluminum to assure a high quality finish. It is designed for various working conditions such as severe climate, sand and salt corrosive environments and marine usage.
8. Rotor Blades: Advanced airfoil design to capture maximum wind energy. Made of mixed nylon and reinforced fiber glass materials using the latest advanced thermoplastic engineering and precision injection molding technology for high strength, flexibility and aerodynamic braking. The blades have exceptional consistency and aerodynamic outline with a mass distribution that ensures the rotors operate with nearly no noise and minimal vibration.
In summary, Windmax H series are the most well built, reliable, most efficient and cost-effective small wind turbines available on the market today.
The result: greater energy production yield and lowest ownership cost.
Design Features
Advanced over-speed control mechanism vs. old style furling
Problems with old style furling: Old style furling works well in an ideal, wind tunnel test environment. Realistically, wind speed and wind direction changes frequently and mechanical furling doesn’t have instantaneous response to actual changes of wind status. Especially in bad weather conditions, small wind turbine furling components wear out quickly, therefore, increases maintenance costs and shorten wind turbine service life or causes system failure.
Most of old style furling based wind turbines have three moving parts. It is the moving parts for mechanical over-speed protection that wear out and require a lot of maintenance. Operation of furling based wind turbines would lead to mechanical abrasion, cause vibration, malfunction, and failure of the wind turbine and other devastating results in the long run.
The rule of thumb for a reliable wind turbine is that the fewer the moving parts, the more reliable the wind turbine is.
The Windmax Solution: Windmax H series adopted Innovative over-speed control so it improves the reliability by abandoning the moving parts for mechanical over-speed protection and minimizing the moving parts to only two.
Innovative over-speed control design of the Windmax H series: The Windmax H series speed limitation abandoned the traditional failure-prone mechanical furling system and solved safety and reliability problems facing most small wind turbines. Advanced speed limitation of Windmax H series is achieved through advanced electromagnetic speed limitation supplemented by aerodynamic speed limitation by blade deformation. Electromagnetic braking is used in combination with Aerodynamic braking to reduce the rotational speed of the generator.
Combination of Electromagnetic braking and aerodynamic braking maximizes energy capture by extending Windmax H series turbine’s operating speed range into higher speed winds and lower speed winds which are missed by the old style wind turbines.
1. Electromagnetic speed limitation:
Controller will monitor the wind generator rotation through the wind generator output voltage and frequency, and will timely control wind generator rotation by generating reverse reluctance torque if necessary, according to different wind conditions and battery status. Electromagnetic control features quick response, high reliability and therefore ensures the entire control system to be highly reliable.
2. Blade aerodynamic braking:
In high wind speed conditions, patent pending blades will generate a reverse reluctance torque, so that the blade efficiency falls and the blade rotation speed starts to decline. With the continuing reluctance torque, blade rotation speed is limited to a certain range to prevent damage to the wind turbine blades.
Wind-solar hybrid power generation wind turbine system
Problem with single source renewable energy system:
1st Generation single source renewable energy systems such as solar systems or wind turbines don’t use renewable energy efficiently. Wind turbines creates less output during the summer, whereas during the winter the solar panels will produce less output.
Windmax Solution:
Our Windmax hybrid solar-wind turbine integrated wind and solar power sources capture the most energy in all conditions. Since solar and wind energy availability differs by locations, seasons and climates, solar and wind energy can be mutually complementary in that solar and wind hybrid systems make full use of wind and solar energy together to generate as much power as possible compared to a single energy source for power generation. A solar & wind hybrid system is more cost-efficient than wind or solar alone.
Easy-to-install, light weight, compact, reliable and maintenance-free wind turbines, designed for both land-based and marine applications.
Problem with old style wind turbine systems:
Most old style wind turbines are heavy weight with unpredictable reliability, hard to install and require lots of maintenance. Due to the fact that most installations are in very remote and inaccessible locations, the old style systems make regular maintenance costly and sometimes impractical.
Windmax Solution:
Windmax H series maintenance free design has a minimum of moving parts with inherent reliability. Our light weight, compact die-casting aluminum alloy generator design makes installation very easy. Rotor blades built with latest advanced thermoplastic engineering and precision injection molding technology is durable and efficient.
Higher performance at low wind speed
The problem with small wind turbine system on the market today: The most challenging problem facing small wind turbine systems is that power output is very low or close to nothing under low wind condition. The wind speed in most locations don’t stay at rated wind speed all the time, wind turbine actually operates at wind speed lower than rated wind speed at most of the time. In order to have good overall energy output, it is critical for small wind turbine to output as much as power at low wind speed.
The WindMax Solution: Strong Neodymium magnet PMA, unique winding and multi pole design reduces the start-up torque of the alternator that assures the WINDMAX-H series can generate electricity at low wind speed. WindMax system components such as wind generator and blades are designed to output more electricity at low wind speed than other small wind turbines on the market today. WindMax system’s excellent power output under low wind speed results in greater energy production yield and lowest ownership cost.
WindMax H series components are built with advanced technologies
Generator: The generator is built using high-performance rare earth neodymium permanent magnets, so the alternator is compact and light weight with a high power generating efficiency. The unique winding and multi pole design reduces the start-up torque of the alternator that assures the WINDMAX-H series can generate electricity at low wind speed. The generator features class B insulation, IP55 class protection, and is designed with a sufficient cushion of overload to ensure overall wind turbine reliability.
Generator housing is made with precision cast technology from high strength aluminum to assure a high quality finish. It is designed for various working conditions such as severe climate, sand and salt corrosive environments and marine usage. Aluminum die cast alloys can withstand the highest operating temperatures of all die cast alloys. Ideal for demanding environments, it offers high strength and rigidity along with good corrosion resistance and heat dissipation.
Patent pending Rotor Blade design vs. traditional hand made fiber glass blades: Our Blades are made with the latest thermoplastic engineering and injection mold technologies. The blades are made of mixed reinforced fiber glass and nylon materials. These manufacturing technologies ensure the highest strength, flexibility of blades and consistency of the blade shapes. The blades will automatically slow the turbine in strong winds and reduce noise.
A set of 3 Blades designed to capture as much wind energy as possible. Patented aerofoil blade design makes the system run much more efficiently and the rotor blades are made with the latest advanced thermoplastic engineering and precision injection molding technology.
The blades have exceptional consistency and aerodynamic outline with a mass distribution that ensures the rotors operate with nearly no noise and minimal vibration.
The blades feature lower start-up and cut-in speed and begin producing power at 2 m/s or 4.5 mph.
Solar/Wind Hybrid Charge Controller: A 16-bit microprocessor powered Solar/Wind Hybrid Charge Controller delivers electricity generated by both a wind turbine and a solar module into batteries. The controller has over-charge protection, low-voltage protection, pole-confusion protection and automatic dump-load function. The controller adopts the constant voltage charging mode-PWM, and it is reliable and safe with a highly efficient, long service life.
Main Features
1. PWM CV charging function protects the batteries
from being over charged and energy can be fully
utilized.
2.16-bit Microprocessor chip ensures accurate control.
3. Return difference control function in the charging
voltage detector of various circuits to prevent
vibration status of switches
4.Perfect protections: over charge protection, over
discharge protection, reverse connection protection,
solar cell panel reverse connection protection
5.Automatic brake and manual brake ensures that the
wind turbine and the PV & wind hybrid charging
controller operate safely and reliably
Starting at just $665.00 USD the new WindMax line offers great value to small wind turbine feild of entries and can be viewed at www.magnet4less.com
About the Author
Allen Wang has been in the magnet and wind energy industry since 2002.